Routine vibration monitoring, made simple.
Entry-level condition monitoring, designed by engineers for engineers: a wireless sensor, the free Collector app for Android and Vib Analysis for Windows. Advanced technology at a low cost of ownership.
Plug & play
Sensor, app and software work together from day one.
Free Collector app
On any number of Android phones and tablets.
Route & NonRoute
Guided routes, plus readings on any other machine.
100% offline
No cloud, no telemetry. Your data stays yours.
From route plan to report in three steps.
Quick to implement and simple to operate. Files move between the office and the field by USB drive or file share.
- 01
Plan
Build the plant tree in Vib Analysis, set up each measurement point and drag points into a route. Export the route file.
- 02
Collect
Load the route in the Collector app, wake the sensor with its magnet and connect over Bluetooth. The app takes you from point to point.
- 03
Analyse
Import the result file into Vib Analysis. Review trend, spectrum, waveform and waterfall, check alarms and publish an HTML or PDF report.
The field app that shows the data at the machine.
A free app for Android phones and tablets. No user name, no password: open it, load the route and start collecting.
- Guided routesThe next point opens automatically. Skip and come back later.
- NonRoute readingsMeasure any machine in the field, on or off the route.
- Four views, liveFFT, waveform, trend and cascade, with live view.
- Analysis cursorsSet 1X, harmonics, sidebands and band markers.
- Alarm statusOverall value and alarm colour on every point.
- Notes and retakeAdd a note, save or retake each reading.
- Training simulatorPractise the route with no sensor connected.
- Works offlineReadings stay on the device until you send them.
Everything on one screen.
On a tablet the Collector shows the route tree, waveform, spectrum and reading history together, with large buttons to move through the route and save each reading.
Phone or rugged tablet, light or dark.
- Phone and tablet layoutsThe same app adapts to the device in your hand.
- Light and dark themesEasy to read in bright sun or a dim plant room.
- Sensor connects in secondsWake it with the magnet, scan and connect over Bluetooth 5.
The office software that holds your whole programme.
Organise the plant, plan routes and turn collected readings into clear trends, spectra and reports.
Plant tree
Company, plant, area, system, machine and point, with copy, paste and multiple-point edit.
Synchronised plots
Trend, spectrum, time waveform, waterfall and bars follow the point you select.
Measurements
Velocity, acceleration and envelope (gE), with RMS, peak, peak-to-peak, crest factor and kurtosis.
Bearings
Shared bearing catalogue with CSV and Excel import, and fault-frequency markers on the spectrum.
Routes and alarms
Drag-and-drop route builder and overall alarm levels Normal, Warning and Danger.
Reports
HTML and PDF reports with the latest trend, FFT and waveform per point.
Single-axis or triaxial, over Bluetooth 5.
A rugged sensor that mounts on the machine and connects to the Collector. Only authorised GoDynamics sensors connect.
| Single-axis (piezo) | Triaxial (MEMS) | |
|---|---|---|
| Measures | 1 axis + temperature | 3 axes (X, Y, Z) + temperature |
| Frequency (±3 dB) | 0.3 Hz to 10 kHz | DC to 6 kHz trend; DC to 10 kHz spectrum |
| Amplitude range | ±20 g | ±2, ±4, ±8 or ±16 g |
| Sample rate | 256 Hz to 25.6 kHz, up to 80 s capture at 25.6 kHz | |
| Temperature | −25 °C to +75 °C | |
| Mechanical | Ø 33 × 92 mm, ¼-28 UNF mount, IP66 | |
| Power | 3.6 V lithium AA cell, field replaceable | |
| Hazardous areas | Optional ATEX / IECEx / UKEX version | |
Private by design.
Offline by design
No cloud and no telemetry. Measurement data never leaves your computer.
IT friendly
Runs as a standard user, with no service, driver or open port.
Signed licence
Ed25519-signed licence file for each PC, activated offline.
Protected access
Administrator, Analyst and Read-Only roles, audit log and daily automatic backup.